Dimensions

• Box 90x90x115 mm included terminal blocks
• Front panel 96×96 mm
• Weight 0,4 Kg

Power Supply

• Power supply (24 ÷ 240) Volt AC/DC ± 10% 50/60 Hz without polarity respect, absorption 4 VA

Inputs

• Four analogical inputs, temperature control and mapping with PT100 sensor at three wires inside range from -10°C to +200°C

Outputs

• Four relays 250V AC, 10 A max (resistive load), free switch contact

Communication

• Wifi module with secure access according to GDPR protocol with certificates management, serial number and activation key
• Access point always active for the off-line management
• Access by most popular browser (Safari, Firefox, Chrome)
• No program needed, no app to install
• Timestamp events, with RTC clock and buffer battery
• Whip antenna located on the back of the device
• Remote antenna if needed (optional)
• Access point mode for data download in the absence of internet connection and possible import on cloud

Cloud

• Device management for users and groups
• Remote connection to the cloud
• Reading of temperatures, configurations, thresholds, status, and current alarms
• Event storage with datalogger
• RTC always synchronized with Greenwich time
• Possibility of time zone management
• Current temperature graphs and storage
• Data export in CSV

Characteristics

• Self-extinguishable NORYL Box
• Protection degree front panel in polycarbonate: IP65 (IP66 on request)
• Protection degree of rear panel on terminal board side: IP20
• Display with light segments
• Visualisation of max temperature and the relevant channel in the automatic mode
• Alerts of pre-alarm, alarm, probes fault, fanning, manual function, historic highs
• System programming directly by frontal panel
• Possibility to select independently each channel
• Limit of alarm and pre-alarm settable in the range (-9°C ÷ 199°C)
• Precision ± 1% on full-scale ± 1 digit
• Cooling fan control on three or four channels
• Comparison of temperature for cooling fan between two different levels (L and H)
• Four selectable operating modes
• Detection of fault probes, maximum flexibility of managing and simplicity of programming, checking of validity of the insert data during programming phase
• Continuos storage of planned and reached values by each channel (limits and historic highs)
• Dielectric isolation: 2,5 KV AC for 60”
• Software configuration to control the environment temperature
• Resolution 1°C
• Working temperature of device from -20°C to 60°C
• Max allowed dampness in the room 90% not condensing
• Electrical connections with fast-polarised connectors
• Possibility of manual relays switch through menu test relays to simulate and check the reliability of contact
• Technical manual in five languages (and more on request)
• Construction in accordance to EU and RoHS rules
• Tropicalization (optional)